AST AST4600 Datasheet - Manual (Page 2)

TM
www.astsensors.com © 2014 American Sensor Technologies Inc. AST4600 01/30/2014.
All specifications subject to change without notice.
Ordering Information
Pressure Ranges
++ 2.5 and 7.5 PSI units must be ordered in inches of H
2
O
Pressure PSI
0-1
Pressure Code V
ented
G 0001
Pressure PSI
0-100
Pressure Code Factory Sealed
0 0100
0-2.5 ++ G 0069 0-200 0 0200
0-5 G 0005 0-500 0 0500
0-7.5 ++ G 0208 0-1,000 0 1000
0-10 G 0010 0-1,500 0 1500
0-15 G 0015 0-2,500 0 2500
0-25 G 0025 0-3,000 0 3000
0-50 G 0050 0-5,000 0 5000
0-100 G 0100 0-7,500 0 7500
0-200 G 0200 0-10,000 1 0000
0-500 G 0500 0-15,000 1 5000
0-1,000 G 1000 0-20,000 2 0000
Output Red Black White Green
Voltage +V Supply -V Supply Output Case Ground
4-20mA +V Supply -V Supply Not Used Case Ground
For U.S. installations, sensor case ground (green wire) must be
bonded to ground according to Article 501 & 505 of the NEC.
Wiring
Options
000= No Options
Process Connection*
A= 1/4" NPT Male (up to 10,000 PSI)
I= 1/4" NPT Female (up to 15,000 PSI)
P= 1/2" NPT Male (up to 15,000 PSI)
W= F250C Female Autoclave (10,000 to 20,000 PSI)
* for other ports contact factory, "W" not available in 316L
Pressure Unit
B= Bar K= kg/cm 2 P= PSI
Wetted Material +
0= 17-4PH 1= 316L 2= Inconel 718 4= Hastelloy C276
+ Consult factory on availability of Inconel 718 and Hastelloy C276
Series Type
Insert Pressure Code
AST4600 A 0000 P 4 1 000 T 1
Pressure Range
G= Gauge Pressure**
V= Gauge Pressure (Vacuum Calibrated)**
0= Sealed Gauge up to 9,999 PSI
1= Sealed Gauge up 10,000 to 19,999 PSI
2= Sealed Gauge 20,000 PSI
** Not suitable for Class II
Electrical
T= 2ft. 18 AWG wires U= 4ft. 18 AWG wires W= 2 Meter 18 AWG wires
Outputs
3= 1-5V 4= 4-20mA (2 wire loop powered) 6= 1-6V
-Z
Approval
-Z= Add “-Z” for CRN Registered to ANSI/ASME B31.3. Contact factory for material, pressure, and process connection options.