2getting up and running – AGFA DV-5000G User Manual
Page 10
9
2
Getting Up and Running
Loading the Battery
Before using the camera, end users must load
battery.
1. Follow the arrow direction and slide to eject the
battery cover.
2. Insert the battery according to the correct polarity
marks ( + or -)
3. Close the battery cover firmly.
Inserting and Removing an SD Card（Optional）
The camera comes with internal memory which allows you to store pictures, movies, voice
recordings and music. You can expand the memory capacity by using an optional SD or MMC
memory card up to 4GB. To insert a memory card, refer to the figure as below:
1. Insert the memory card into the right position.
2. To remove an installed SD card, press the card inwards
to release it.
3. When the card pops out, gently remove it from its slot.
Note
When a memory card is fitted, movies and pictures are
saved on card rather than on the built-in memory.
Eject