SHARKOON Vaya Value - Manual (Page 11)

VAYA ECONOMY
6. Mounting a hard disk drive
1. Take the right side panel off the case.
2. Remove the quick fasteners from both sides of the HDD mounting bay in which you want to install the
hard disk drive (fig. 7).
fig. 7
3. Slide the HDD (its connector facing backwards, its label facing to the top) into the case's HDD mounting
bay from the inside (fig. 8).
fig. 8
4. Attach the HDD from both sides using the respective quick fasteners (fig. 9).
fig. 9
Note:
If you want to transport the case we recommend securing (additionally) the installed drives using the
respective mounting screws:
fig. 10
5. Connect the HDD to the PSU and the mainboard.
(Screws for HDD mounting)
9
