beautypg.com

Tone arm assembly diagram, Rear view diagram – Audio-Technica AT-LP120-USB User Manual

Page 4

background image

4

Tone Arm Assembly Diagram

Figure 3

18. HeADSHeLL

Standard, interchangeable stereo cartridge headshell.

19. HeADSHeLL LOCKInG RInG

Rotate counter-clockwise (to the left) to draw the inserted

headshell firmly into its seated, locked position. Rotate the ring

a full turn to the right to permit removal of the headshell.

20. TOne ARM

S-shaped tone arm geometry reduces tracking error.

21. TOne ARM ASSeMBLY HeIGHT ADJUST

Raises and lowers the entire tone arm assembly to allow the tone

arm to remain parallel to the record surface. (The proper setting

is “0” for the included cartridge.)

22. TOne ARM LIFT

elevates tone arm above record surface.

23. TOne ARM ReST WITH LOCKInG CLAMP

Locking clamp secures tone arm during transport.

24. TOne ARM LIFT ADJUST SCReW

Used to set the amount of tone arm lift.

25. TOne ARM LIFT COnTROL LeVeR (“Cueing Lever”)

Controls action of tone arm lift. (note: Lift mechanism is

hydraulically damped to slow tone arm descent.)

26. AnTI-SKATe COnTROL

Applies a small outward force to the tone arm, counteracting the

tendency of the tone arm to move inward toward the center of

the record.

27. COUnTeRWeIGHT

Balances the tone arm and provides adjustment for proper

downward tracking force on the stylus.

28. TOne ARM ASSeMBLY HeIGHT LOCK

(Hidden under counterweight in drawing)

Locks the tone arm height setting. (Always fully unlock

before attempting to make a height adjustment.)

Figure 2

29. PRe-AMP SeLeCTOR SWITCH

Allows the internal stereo phono pre-amp to be bypassed

when the turntable is used with equipment having

magnetic phono inputs.

30. USB OUTPUT

Use this output to connect your turntable to the USB input of

your computer. Please see included software guide for

instructions.

30

29

Rear View Diagram