Boltek EFM-INV3 - Manual (Page 10)

10/10/2012
(C) 2012 BOLTEK CORP EFM-INV_Instruction_1.2
DO NOT ALLOW FIELD MILL TO ROTATE OR WIRES CONNECTING FIELD MILL WILL TWIST
COAT BOTH SIDES OF RUBBER WASHER WITH SILICONE GREASE.
FAILURE TO PROPERLY TIGHTEN NUT ONTO RUBBER WASHER AND SHROUD WILL RESULT IN
WATER DAMAGE TO FIELD MILL NOT COVERED BY WARRANTY
COMPLETED ASSEMBLY (with 2' tripod)
COMPLETED ASSEMBLY (with pole mount bracket)