Ul listed models included on this install sheet, Specifications, Testing approvals – STI 1102 User Manual
Page 2: Indoor/outdoor use (weather stopper models)
- 2 -
UL Listed Models Included on this Install Sheet
Indoor Use:
STI-1100
With horn for flush mounted appliances
STI-1100RC With horn for flush mounted appliances includes relay contacts capable of
operating from 9-24 VDC remote power or internal 9V battery power
STI-1130
With horn and 2” conduit spacer for surface mounted appliances and
electrical boxes
STI-1130RC Surface mounted version of the 1100RC includes 2” conduit spacer
STI-1200
Without horn for flush mounted appliances
STI-1230
Without horn, with 2” conduit spacer for surface mounted appliances and
electrical boxes
Specifications
Polycarbonate Enclosure
· Flammability
UL94 V-2
· Wall Thickness
.095 inches
· NEMA Rating
Meets NEMA 3R when mounted to smooth non-masonry surfaces
Testing Approvals
It has been tested and approved or listed by:
· Underwriter Laboratories and cUL No. 49G2
· Factory Mutual No. OG6A2.AY (STI-1100 and STI-1130 only)
· NEMA 3R when mounted to smooth non-masonry surfaces (only for Stopper II models
with backplate and gaskets)
· NYC BSA #947-81-5A
· IP 44 Rating (NEMA 3R)
· Obtain local fire marshal approval for State of California
· Operation is ADA Compliant
· UL/cUL Certified to meet ADA compliance
Patents
· United States No. 4267549, Canada No. 1147828Z
Indoor/Outdoor Use (Weather Stopper Models)
All outdoor units include necessary gaskets.
STI-1150
With horn for flush mounted appliances
STI-1150RC With horn for flush mounted appliances includes relay contacts capable of
operating from 9-24 VDC remote power or internal 9V battery power and
includes weather gasket
STI-1155
Surface mounted version of the STI-1150 includes 2” conduit spacer
STI-1155RC Surface mounted version of the STI-1150RC includes 2” conduit spacer
STI-1250
Without horn for flush mounted appliances
STI-3150
Without horn with 2” conduit spacer for surface mounted appliances and
electrical boxes
STI-1102
Replacement horn for cover with alarm
Custom-LBL Custom text message for horn housing
Gaskets
· Closed Cell IV2 with pressure sensitive adhesive
· Replace after 5 years
9V
12V
24V
· Low (95 dB @ 1 ft.)
96mA
107mA
125mA
· High (105 dB @ 1 ft.)
130mA
145mA
182mA
· Min. Operating Req.
2V @ 20mA
4V @ 20mA
4V @ 20mA
Horn
9V
12V
24V
· Relay
23mA
25mA
29mA
· Min. Activation Voltage
3.7V
5.8V
5.8V
· Reset Voltage
1.5V
3.3V
3.3V
· Dry Contact Rating
<30V, 1A
<30V, 1A
<30V, 1A
(type Form “C”)
Relay