Progressive International Electronics C2000 - Manual (Page 10)

C2000 General Information & Warranty
‚ 4
THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE WHICH EXCEED THE AFORESAID OBLIGATIONS AND ARE
HEREBY DISCLAIMED AND EXCLUDED BY SELLER.
W A R N I N G
Warning: Installation must comply with the National Electrical Code, as well as
Federal, State, Local and all applicable codes.
Warning: High voltages are present in this equipment. Disconnect all power before
making installation to prevent personal injury or equipment damage.
Warning: Do not install C2000 units in a volatile, combustible or explosive atmosphere.
All C2000 units must be protected from severe vibration, extreme temperatures and
excessive humidity.
Any peripheral equipment is to be installed over a non-hazardous location.
Any peripheral equipment connected to the C2000 must be UL listed and using standard
RS232 or RS485 communication.
The C2000 must be plugged into a dedicated 115 VAC wall socket with bonded earth
ground.