Progressive International Electronics PIcon II Console - Manual (Page 36)

PIcon II Programming
Rev 1.0 January 2014 31
Program Mode PGM 5 — Set Dollar or Cash/Credit (PIcon II default — C/R)
PGM Mode 5 is used to select either Cash/Credit or Dollar to be shown on reports and
receipts. To enter this mode from the PGM 0 mode number prompt, press <5> on the
numeric keypad and then press . Use the key to toggle between
Cash/Credit and Dollar.
To exit PGM 5, press the key. PGM 0, the mode entry prompt, will appear on
the display. To return to operator mode, press the key again.
Program Mode PGM 6 — Set Gallon/Litre Receipt (PIcon II default — Gallon)
In PGM 6, the default to be shown on reports and receipts, Gallon or Litre, is selected. To
enter this mode from the PGM 0 mode number prompt, press <6> on the numeric keypad and
then press . Use the key to toggle between Gallon and Litre.
To exit PGM 6, press the key. PGM 0, the mode entry prompt, will appear on
the display. To return to operator mode, press the key again.