AVerMedia Technologies AVerVision300i - Manual (Page 34)

28
2. Use the Brightness and Contrast menu functions to reduce the distortion if
applicable.
3. If you discover that the image is blurry or out of focus, adjust the focus ring on
the camera head.
There is no computer signal on presentation screen.
1. Check all the cable connections among the display device, AVerVision300i
and your PC.
2. Connect your PC to the AVerVision300i first before you power on your
computer.
The presentation screen does not show the exact desktop image on my
PC or Notebook after I toggle from Doc Cam mode to PC mode.
1. Return to your PC or Notebook, place the mouse on the desktop and right
click, choose “Properties”, choose “Setting” tab, click on “2” monitor and check
the box “Extend my Windows desktop onto this monitor”. Then go back one
more time to your PC or Notebook and place the mouse on the desktop and
right click again. This time choose “Graphics Options”, then “Output To”, then
“Intel® Dual Display Clone”, and then choose “Monitor + Notebook”. After you
follow these steps, you should be able to see the same desktop image on your
PC or Notebook as well as on the presentation screen.
How do I download images from AVerVision300i to PC ? Is it normal that
AVerVision300i will reset to camera mode after I download images and
disconnect the USB cable?
1. Choose "IMG Download" from the Menu, and then connect the USB cable
to download the captured and stored images from the AVerVision300i to your
PC. When finished, unplug the USB cable. The AVerVision300i will
automatically reset at camera mode.