Master Manufacturing 9 GALLON SPOT SPRAYER - Manual (Page 3)

The following steps should be followed for the maintenance and storage of your sprayer.
1. Wash and flush out sprayer after completion of each phase of your program. Flush out sprayer when
changing chemicals if there is a possibility of the chemicals being incompatible. Use of a detergent is
advisable if the chemical manufacturer does not make specific cleaning recommendations. Flush system
completely, including nozzles. Never use metal objects to open clogged nozzles.
2. Clean sprayer thoroughly before storing at the end of the spraying season. Permanent type anti-freeze added to
the final rinse will leave a rust inhibiting film in parts of the sprayer.
WARRANTY PARTS SERVICE
Products sold shall be warranted from defects in workmanship and material when used within the
service and scope for which they were designed for a period of one year from date of purchase.
Contact Master Manufacturing for replacements parts or warranty work at (800) 864-1649. Do not
return product to your distributor/dealer. Please have your original sales receipt or other proof of
purchase date when requesting any warranty work. To ensure the correct parts are acquired always
provide the model number of your sprayer/attachment and the part number and description obtained
from the illustrated parts breakdown in this manual.