IEI Integration DM_Series v2.04 - Manual (Page 68)

DM Series Monitor
Page 54
5.4.6 USB Touch Panel Connector
Use the rear panel standard USB touch panel connector to connect the monitor to the
system graphics interface.
PIN DESCRIPTION PIN DESCRIPTION
1 VCC 5 VCC
2 Data- 6 Data-
3 Data+ 7 Data+
4 GND 8 GND
Table 5-5: USB Touch Panel Connector Pinouts
Figure 5-6: USB Touch Panel Connector
5.4.7 Optional DC Power Connector
Use the rear panel 3-pin terminal block DC power connector to connect the monitor to a
DC power source.
Figure 5-7: DC Power Connector