White’s Electronics TDI User Manual

Page 25

Text mode
Original mode

PulseScan TDI Owner’s Guide 5

(will only be active when Gnd.Bal.
toggle is ON)

(If there is interference

select a quiet frequency)

INITIAL SET-UP -

To get started, set the controls to a mid-range position. For now, the main con-
cern is setting the threshold, and adjusting the settings for the other controls.

# - Set the controls to mid-range as follows -
Ground Balance 6

Conductivity All

Freq.Adj. 12 noon

Pulse Delay 10 uS

Gain 6

Gnd.Bal. toggle OFF

Check your Battery LED for charge level