Levenhuk C800 NG Digital Camera, USB 2.0 - Manual (Page 117)

Help Manual
109
14.8 RoundRect
1. Measure Arc object to determine the round size. Its size is 21.39X2=42.8;
2. Choose Options>Measurement••• , click Round Rectangle to set the Round to 43
and 43 respectively;
3. Move mouse to the 1st point; click its left mouse button to mark it;
4. Move mouse to the 2nd point, click its left mouse button to mark it, a round
rectangle with Rr1 and its lengths of the two dimensions will be shown.
Note : 1) To check or modify the parameters of the selected object, just select a single
measurement object and the Measurement sidebar will be activated automatically.
Here you can edit the corresponding object parameters to modify its properties;
2) The Appearance , Coordinates on Measurement sidebar will be enabled only
when a single object is selected. The Calculation will be effective for a single selected
object or more selected objects. Its calculated items will depend on the selected
objects type (The type could be the same or could be different).
14.9 Ellipse
1. Choose Measurements>Ellipse command;
2. Move mouse to mark the 1st point;
3. Move mouse to mark the 2nd point;
4. If it is not superposing with the shape on the image, choose
Measurements>Object Select to adjust the position to get the right shape in order to