ION Audio Karaoke Pro - Manual (Page 4)

4
INSTALLING KARAOKE CLOUD SOFTWARE
IMPORTANT: To ensure the best possible experience with the Karaoke Cloud app, use the most
current iOS on your iPad, iPhone or iPod touch (not included).
Follow these steps below to download the app on your iPad, iPhone, or iPod touch:
Note: You can also download the app on your computer, but remember to connect and sync your iPad, iPhone, or
iPod touch to transfer the app to iPad, iPhone, or iPod touch.
1. Open
the App Store on your iPad, iPhone or iPod touch.
2. Search for the Karaoke Cloud app and download it.
3. Tap 'Install App'.
4. Connect your iPad, iPhone, or iPod touch to Karaoke Pro.
5. Launch the Karaoke Cloud app.
You can also download other apps for Karaoke Pro, such as Karaoke Channel.
All users can visit www.karaokecloud.com or use your own favorite karaoke app. Karaoke Pro uses a standard 1/8"
input that can work with virtually any music source (CD players, MP3 players, computers, etc.).
IMPORTANT NOTES
Use this troubleshooting guide if you encounter any of the problems below:
•
The sound is distorted: Try lowering the volume control of your sound source or music instrument. Also, try
to reduce the overall volume of Karaoke Pro.
• There is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass level.
• There is a high-pitched whistling noise when using a microphone: This is probably feedback. Point the
microphone away from the speaker.
• If you can’t hear the microphone over the music volume: Turn down the music volume from your source
(iPad, iPhone, or other device).
• There is a high-pitched whistling noise when using some apps on my iPhone/iPad/iPod touch/other
smartphone: This is probably feedback. You may be using an app that uses your device's internal mic. When
the Smartphone/device is close to Karaoke Pro's speaker, this may cause feedback. To avoid this,
use a
TRRS cable, move the device away from Karaoke Pro's speaker, or use apps that do not use your device's
internal mic (e.g., Karaoke Cloud).
• The included cable doesn't reach my iPad or Tablet in Portrait mode: You can use a standard 1/8" stereo
cable with Karaoke Pro. Visit your local electronics retailer to purchase this cable.
Note: For the best performance with iOS apps, use a 1/8" TRRS cable.
SPECIFICATIONS
Input Voltage: 9V DC, 1.5A Center Pin Positive
Input Wattage: 13.5W
Output Wattage: 7W (Peak)
Wireless Microphone Frequency: 174.8MHz
Included Cable Type: 1/8" TRRS stereo cable
Note: Any 1/8" TRS stereo cables will also work with Karaoke Pro.
Note: For the best performance with iOS apps, use a 1/8" TRRS cable.
Microphone Type (wired, 1/4" microphone input): Any dynamic microphone with 1/4" cable (available at your local
electronics or musical instruments retailer)
To purchase cables or microphones directly from ION Audio, please email [email protected].