Innovative Tools & Technologies Innovative Panel Train™ - Manual

Install wheels. No washer required.
Innovative Panel Train Assembly Instructions
1 2
5 4
Remove rear wheel caster nut from cart
and discard lock washer.
3
Install Leg Connector, noting direction as
shown.
Install extension leg with rubber pad
toward center. Tighten 3/4 nut - do not
overtighten. Repeat for other arm.
Use pin to hold leg in upright position.
Install protective rubber cap.
Adhesive can be used to better keep
rubber cap in place.
Center the post holder on back side of
cart. Tighten knobs. Posts shown above
in stored position.
6