Innovative Tools & Technologies Innovative Mobile Plastic Sheeting Dispenser™ - Manual

Smaller boxes fi t inside upper and
lower box caps.
Install axle and wheel to Base Legs
Install handles as shown. Biceps this
large NOT required for assembly.
Insert Box Holder Upright into Lower
Box Cap Base. Tighten bolts fi rmly.
Upper Box Cap does not need to be
removed when installing sheeting.
Bolt Lower Box Cap Base to Base Leg
assembly.
Shows sheeting installed.
Larger boxes fi t outside of upper
and lower box caps.
For a demonstration video, please visit: www.InnovativeTools.com
Magnetic tape to
hold razor blade
Innovative Mobile Plastic Sheeting Dispenser™ Assembly Instructions
P/N I-MPSD
Helpful usage hints
1. When installing boxes, use the vertical position.
2. Cut fl aps off of box ends before installing into holder.
3. When dispensing plastic horizontally, always have plastic dispense from top as shown above.
4. Plastic cuts best with straight razor blade against the factory box.