HTP Flexible Vent Kit - Manual

Advanced Heating and Hot Water Systems
P.O. Box 429
∙ 120 Braley Road ∙ East Freetown, MA 02717 ∙ 508-763-8071∙ Fax: 508-763-3769
FLEXIBLE VENT KIT
INSTALLATION INSTRUCTIONS
(Part #8400P-001)
NOTE: Read this entire instruction manual and refer to the Venting section of the appliance
Installation and Maintenance manual before starting vent installation. Follow all instructions
exactly as written.
The following defined terms are used throughout this manual to bring attention to the presence of
hazards of various risk levels, or to important product information.
DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious
injury.
WARNING indicates a potentially hazardous situation which, if not avoided, could result in serious injury
or death.
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury.
CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not
avoided, may result in property damage.
INTRODUCTION
This instruction manual is for use only with appliances that have been certified to use this ventilation
system. These appliances are HTP’s Pioneer, Phoenix, Versa-Hydro, MC-Series, and Elite appliances.
Installing any other appliance with this system will result in property damage, severe personal injury, or
death.
SAFETY CONSIDERATIONS
• Prior to installation, examine all components for possible shipping damage.
• Proper joint assembly is essential for safe installation. Check the integrity of joints upon
completing assembly.
• This venting system must be free to expand and contract under normal operation.
• This venting system must be supported in accordance with these instructions.
• Assure unrestricted vent movement where required through walls, ceilings, and roof penetrations.