Troubleshooting – Audiovox CAMSBAR User Manual
Page 12
Troubleshooting
Symptoms Solutions
The CAMSBAR does not turn
on after the vehicle is started
and the vehicle is in reverse
1. Check the wiring and connections
2. Check the fuse in the power harness
3. Check the power connection at the
reverse lamp
Backup sensors keep sounding
Clean the Bar with a soft cloth.
The Monitor Stays on all the
time or runs when the vehicle
is not in reverse.
The system is not wired correctly. If the
system continues to operate while not in
reverse gear, re-check your wiring at the
reverse lamp.
The monitor is very dark or
the image changes slowly
In extreme cold or hot conditions, the LCD
screen may react slowly. This is normal and
will clear as the vehicle cools or warms to a
normal temperature.
11
- ACA200 (18 pages)
- GC-600GAB (2 pages)
- PRO 9246CH (8 pages)
- AS-RS (8 pages)
- ACAM350 (10 pages)
- WFM7810 (3 pages)
- Automobile Accessories (20 pages)
- PRO 9232 (8 pages)
- PRO-OE3C (4 pages)
- CMOS2 (2 pages)
- APS-55TWT (4 pages)
- Prestige APS-25HJ (12 pages)
- APS 996 (28 pages)
- PRO-9056 (19 pages)
- APS 95 BT3 (12 pages)
- PRESTIGE PLATINUM BY AUDIOVOX APS 686T (20 pages)
- PRO 9232S (8 pages)
- 50-0312x SERIES (5 pages)
- PRO-9056TW (2 pages)
- ACAM250 (10 pages)
- AS9233ST (8 pages)
- AX-45 (8 pages)
- AA-RS5CS (16 pages)
- PRO 9445FT (4 pages)
- PRO 2000 (2 pages)
- APS-25KB (6 pages)
- AS-9501a (2 pages)
- 50-0301x-014 SERIES (5 pages)
- Prestige 128-8601 (8 pages)
- APS-92BT-CL (6 pages)
- ROSIBC (5 pages)
- APS 800a (8 pages)
- Prestige 128-8602 (8 pages)
- 50-0286x-019 Series (6 pages)
- CMOLF (8 pages)
- APS-800 (12 pages)
- 5BCR (8 pages)
- AS-GMDLT03 (2 pages)
- AS-9631 (1 page)
- CA 5150 (10 pages)
- CCDLF (8 pages)
- Platinum APS 675 (18 pages)
- SPS GC-600 (2 pages)
- PRO 9549FT3 (8 pages)