General Pump T16A-18A-20A-22A - Manual (Page 18)

GENERAL PUMP
A member of the Interpump Group
KT16A/18A/20A/22A SERIES
3. SCREW CALIBRATION
Screws are to be fastened exclusively using a torque wrench.
Description
Exploded View
Position
(From Owner’s Manual)
Fastening
Ft. Lbs.
Fastening
Nm
Cover Fixing Screw 9 7.4 10
Oil Discharge Plug 11 30 40
Piston Fixing Screw 27 14.8 20
Con-rod Fixing Screw 18 22.1* 30*
Valve Cover Fixing Screw 45 132.8*** 180***
Head Fixing Screw 47 59** 80**
2nd PTO Flange Fixing Screw 96 107**** 145****
* The con-rod cap fixing screws must be tightened at the same time respecting the
phases indicated on page 7.
** The head fixing screws (exploded position 47) must be tightened with a torque wrench respecting
the sequence shown in the diagram in fig. 34.
*** The valve cover fixing screws (exploded position 45 must be tightened with a torqe wrench
respecting the order shown in the iagram in fig. 34.
****To fix the 2nd PTO flange, use Loctite 243 blue, p/n F12006400.
Page 18
Ref 300942 Rev.A
03-14