Farm Star HK-1132 - Manual (Page 10)

REF. NO. PART NO. DESCRIPTION NO. REQ’D.
PARTS FOR HK-226 - FIG. 3
2 590072 Complete Cat. I Top Link - See Fig. 1 1
12 590002 Top Link Pin, Cat. I (AK-9) 1
14 860304 Top Link Bracket Assembly 1
15 2503052 7 / 16 ” - 14 NC x 4 1 / 2 ” Hex Head Bolt 4
16 2502006 7 / 16 ” Spring Lock Washer 4
PARTS FOR HK-326 - FIG. 3
3 590006 Spring Ring Linchpin (AK-14) 1
12 590002 Top Link Pin, Cat. I (AK-9) 1
14 860304 Top Link Bracket Assembly 1
15 2503052 7 / 16 ” - 14NC x 4 1 / 2 ” Hex Head 4
16 2502006 7 / 16 ” Spring Lock Washer 4
2 590072 Complete Cat. I Top Link - See Fig. 1 1
NS 860118 2 1 / 2 ” Hitch Prong (Cat. I & II, 26” Spacing) 2
PARTS FOR HK-426 & HK-432 - FIG. 4
17 860401 Top Link Bracket Assembly 1
18 2503106 5 / 8 ” - 11NC x 1 3 / 4 ” Hex Head Bolt 4
19 2502007 5 / 8 ” Spring Lock Washer 4
2 590076 Cat. II Top Link Assembly (AK-600) See Fig. 1 1
NS 590027 Top Link Bushing (Cat. I to II) (AK-54) 1
21 590028 Cat. II Top Link Pin (AK-56A) 1
9 2
Safety Information
All equipment is potentially hazardous. There is no substitute for a cautious, safe-minded operator who
recognizes potential hazards and follows reasonable safety practices.
When the use of hand tools is required to perform any part of assembly, installation, adjustment, maintaining,
repairing, removal, or moving the implement, be sure the tools used are designed and recommended by the
tool manufacturer for that specific task.
Personal protection equipment including safety glasses, safety shoes, and gloves are recommended during
assembly, installation, operation, adjustment, maintaining, repairing, removal, or moving of the hitch kit.
Always use two people to handle heavy, unwieldy components during assembly, installation, removal, or
moving of the hitch kit.
Never place any part of your body where it would be in danger if movement should occur during assembly,
installation, operation, maintaining, repairing, removal, or moving the implement.
Never place yourself between the tractor and implement while implement is in operation.
Do not work under a raised implement unless it is securely blocked or held in position. Do not depend on the
tractor hydraulic system to hold the implement in place.
A heavy load can cause instability of the tractor. Use extreme care during travel. Slow down on turns and
watch out for bumps. The tractor may need front counter-weights to counter-balance the weight of the
implement. An unstable tractor could steer badly and possibly tip over, causing injury or death.
Never use alcoholic beverages or drugs which can hinder alertness or coordination while operating equipment.
Consult your doctor about operating tractor and implement while taking prescription medications.
Do not allow others to ride on the tractor with an operator. Riders are subject to injury such as being struck by
foreign objects or being thrown off. Riders obstruct the operator’s view resulting in unsafe operation. Never
allow anyone to ride on the implement!
Before you operate any implement, check over all pins, bolts and connections to be sure all are securely in
place. Replace any damaged or worn parts immediately.
Do not allow anyone who is not familiar with the safety rules and operation instructions to use this equipment.
Never allow children to operate or be around equipment.
Do not exceed lift capacity of the tractor hitch.
Keep alert and watch the front as well as the rear when working with the attached implements.
PARTS FOR HK-526 - FIG. 5
12 590002 Top Link Pin, Cat. I (AK-9) 1
22 860501 Top Link Bracket Assembly 1
23 2503026 1 / 2 ” - 13NC x 1 1 / 4 ” Hex Head Bolt 3
24 2502002 1 / 2 ” Spring Lock Washer 3
2 590072 Complete Cat. I Top Link - See Fig. 1 1
PARTS FOR HK-626 & HK-632 - FIG. 6
19 2502007 5 / 8 ” Spring Lock Washer 4
2 590076 Complete Cat. II Top Link Assembly (AK-600) See Fig. 1 1
21 590028 Top Link Pin, Cat. II (AK-56A) 1
25 860601 Top Link Bracket Assembly 1
26 2503048 5 / 8 ” - 11NC x 2” Hex Head Bolt 4
NS 590027 Top Link Bushing, Cat. I to II (AK-54) 1