ATEN ACS-1208L - Manual (Page 26)

w
F4 ADM:
F4 is an Administrator only function. It allows the Administrator to configure
and control the overall operation of the OSD. To change a setting Double
Click it; or use the Up and Down Arrow Keys to move the highlight bar to it
then press [Enter].
After you select an item, a submenu with further choices for you to select
from appears. Double Click the choice you want, or move the Highlight Bar to
then press [Enter]. An icon appears before the selected choice so that you
know which one it is. The settings are explained in the following table:
Setting Function
SET
USERNAME
AND
PASSWORD This function is used to set Usernames and Passwords for the
Administrator and Users:
1. One Administrator and four User passwords can be set.
2. After you select one of the User fields or the Administrator field,
a screen that allows you to key in your password appears. The
password may be up to 12 characters long, and can consist of
any combination of letters and numbers (A - Z, 0 - 9).
3. For each individual, key in the Username and Password, then
press [Enter].
4. To modify or delete a previous Username and/or Password,
use the backspace key to erase individual letters or numbers.
SET LOGOUT
TIMEOUT If there is no input from the console for the amount of time set
with this function, the Operator is automatically logged out. A
login is necessary before the console can be used again. This
enables other Operators to gain access to the computers when
the original Operator is no longer accessing them, but has
forgotten to log out. To set the timeout value, key in a number
from 1 - 180 minutes, then press [Enter]. If the number is 0
[zero], this function is disabled. Default is 0 (disbabled).
(Table continues on next page)
2002-01-15
22 ACS-1208L / ACS-1216L User Manual