Frieling MILKchiller™ 0601 - Manual (Page 14)

14
Removing Empty Carton or Container
The MILKchiller™ notifies the operator that the content of the container
is getting low by flashing LOW on the display. To remove an empty
carton or container:
1. Lift the lid by pulling upward on the dispensing spout.
2. Disengage the Air Hose Fitting and Air Hose from the Disposable Straw
Cap.
3. Lift the empty container from the chilling chamber.
4. Dispose of empty container and Disposable Straw according to local
recycling laws and policies.
5. Clean the Chilling Cavity as outlined in the Care and Cleaning Section.
To refill the MILKchiller™ with a full carton or container, follow the
instructions found in section INSERT DISPOSABLE STRAW and
LOAD CONTAINER.
Before Leaving for the Day
1. Remove the container from chilling chamber and place in refrigerator for
overnight storage.
2. Turn OFF the MILKchiller™ to save energy.
Dispensing Dairy Product
The push button on the left side of the MILKchiller™ causes the dairy
product to be delivered through the dispensing spout. Dairy product
will be delivered for as long as the button is depressed up to 60 seconds.
There might be a slight delay between pushing the button and the
delivery of the dairy product.
Dispensing
Spout
Push Button to
Dispense Dairy
Product
PLEASE NOTE: The force of depressing the Push Button may cause the LOW
level indicator to flash. When the button is released, the LOW level indicator
will disappear.