Andrew 5.6-Meter ESA User Manual
Page 27
Step 5
Step 6
27
Installation Procedures
Hoist elevation jackscrew assembly to mount. Attach 201544 azimuth pivot assembly to
201327 joint assembly with 7/8 x 2-1/4 hardware from pivot assembly to joint assembly
as shown in Figure 32.
Figure 32
Attach 201458 azimuth pivot assembly to 201408 beam assembly with a line of RTV
around the plate and four 7/8 x 2-1/4 in (57 mm) holts inserted from pivot assembly to
beam assembly as shown in Figure 33.
Figure 33