ATON Source Input Wall PlateWallplate DHSIP - Manual (Page 21)

© 2008 • All rights reserved. 19
DHSIP Source Input Wall Plate
Setting Function
All Down No GAIN
DIP Switch 1 & 3 UP +4dB GAIN
DIP Switch 2 & 4 UP +8dB GAIN
DIP Switch 1, 2, 3 & 4 UP +10dB GAIN
Try each setting and monitor the CLIP LED until it
does not illuminate.
Mount the DHSIP and install Trim Ring.
Note: GAIN adjustment must be set for both
Right and Left Inputs. Both settings should be
the same.
7.