PROLiNK PPL1201 User Manual - Manual (Page 18)

PROLiNK PPL1201 User Manual www.prolink2u.com
Version 1.00 Page 13 of 25 PPL1201
• Autoscan
Shows the scanning status (Default is “ON”).
o
Device Name
Show the default device name. One may redefine or change the name by clicking on the name
and editing in place or by clicking the “Rename” button.
o
Password
Show the current password of the PROLiNK® PPL1201 Powerline AV Ethernet Adapter.
o
Quality
Shows the quality of the PROLiNK® PPL1201 Powerline AV Ethernet Adapter connection.
o
Rate (Mbps)
Display the current transmission rate of the selected PROLiNK® PPL1201 Powerline AV Ethernet
Adapter.
o
MAC Address
Show the PROLiNK® PPL1201 Powerline AV Ethernet Adapter’s MAC address.
• Rename
Click to change the name of the selected PROLiNK® PPL1201 Powerline AV Ethernet Adapter.
• Enter Password
Shows the supplied PROLiNK® PPL1201 Powerline AV Ethernet Adapter’s password (Initially left blank).
To set the PROLiNK® PPL1201 Powerline AV Ethernet Adapter password (Which is required when
creating a private network), click and select the device shown in the lower panel and click on the “Enter
Password” button. Follow the pop-up dialog box to complete your password setting.
• Add
Click this button to add a remote PROLiNK® PPL1201 Powerline AV Ethernet Adapter to your network
that is not on the lower panel displayed list. You will advice to locate the passwords for all PROLiNK®
PPL1201 Powerline AV Ethernet Adapter you wish to manage and add them to the local logical network
by clicking the “Add” button. Follow the pop-up dialog box to complete your setting.
• Scan
Click the “Scan” button to perform an immediate search of the PROLiNK® PPL1201 Powerline AV
Ethernet Adapter connected to the computer. The Management Utility will automatically perform the
scanning process and update the display every few seconds by default.
Section 4 Section 4