Impulse W22L100-OFM1 - Manual

Mechanical Drawing: W22L100-OFM1 (With Resistive)
Specifications
2
Model Name
Viewable Size Image
Active Display Area(mm)
Pixel Pitch(mm)
Number of Pixels
Contrast Ratio
Display Color
Brightness(cd/m )
Viewing Angle(CR>=10)
Synchronization Range
Horizontal/Vertical
Recommended Resolution
Signal Connector
Power Source
Power Consumption
Power Management
Plug & Play
Optional Video Input
Optional DVI Input
Optional Touch Screen
Remarks:W22L100 series= VGA input only
W22L110 series= VGA+Video Input
W22L100-OFM1(Standard)/
W22L100-OFM1-S(with SAW Touch)
22"(16:10)
473.76(H)x296.1(V)
0.282mmX0.282mm
1680x1050
1000:1(typ.)
16.7M(8bit/color)
300
-80~80(H); -80~80(V)
31.5~80.0KHz/60~75Hz
1680x1050@ 60Hz
15 pin D-sub
AC100~240V, Universal, 10%
60W typical, normal operation
VESA DPMS Compliant
VESA DDC 1/2B
S-Video, Composite
Yes
Resistive / SAW(need special housing)
22"(16:10)
UNIT:mm
Open Frame LCD
1.0
1.1
Spec change
Spec change Oct-13-09
Mar-31-11
Rev. Reasons Revised Date
Note: this is a simplified drawing and some components are not marked in detail.
Please contact our sales representative if you need further product information.