AGFA M4F - Manual (Page 12)

Global Services North America
Wilmington MA 01887
Site Readiness Check List
Information to Check Yes No
Lateral fork movement capability. Proper lifting rating? ( Pg.4) Forklift
Length of forks should be 60 inches (152.4cm) minimum
Loading Dock If the customer does not have a loading dock, then the freight truck
delivering the Anapurna will need a lift gate to lower the crate to the ground
along with the forklift
3 - 5 HP, 60 - 80 gallon or better Capacity Compressor?
24/7 operation if required. The compressors regulator should be set to 105 -
110 PSI for trip OFF and to 85 PSI to trip ON.
See (pg . 6) Engine air
volume is .28 CFM
Air filtration for moisture and particles?
Compressed Air
Supply
Air regulator for the engine?
Humidity
Range 35% to 75% RH (non-condensing) Ideal 40% ?
Air
Temperature
Not to exceed 126º F or 52 ºC
Room
Temperature
Range 68° F to 80° F (20 – 26.6° C) Ideal 72° F (22° C) ?
Room air exchange should be 10 times per hour ? page 14
RIP Computer
Specs Met? Refer to page 7 for details. Windows Vista operating system can not be
used.
208 Y (Wye), Single Phase, 60 Hz, 40 Amp
40 amp breaker circuit?
Dedicated Circuit?
Line voltage for
engine
A Buck/Boost transformer maybe required to bring the voltage up to 230 -
240 VAC Range.
See page 9.
Floor should be concrete, flat and stable? No Carpet Allowed Floor area
156 lbs/ft² (70 kg/m²) Per foot load on the floor.
Work Space: 500 cm x 550 cm (16.4 feet x 18.1 feet)
Check for clearance (uncrated). No less than 7 foot or 213 cm high. ( Pg.4)
Check doorways for clearance (height, width)
Ceiling Height
Check path from loading dock to installation location
Is there room for the removal and replacement of parts for servicing? ( Pg. 5) System
Orientation
Can all engine doors open fully?
Head Wipes Customer informed of proper heads wipes required? ( Pg 14 )
Questions? Contact 800-879-2432 and ask for an Anapurna Specialist 12