INTELLINET NETWORK 524445 User Manual - Manual (Page 14)

14
SYSTEM & NETWORK SETUP
Daylight Savings — If your locale uses Daylight Saving, activate “Enable Function”
and select the duration using the drop-down menus.
Click “Next” to continue to the next screen of the Quick Setup procedure, where
you select the broadband (Internet connection) type you use.
There are six types of Internet connections available, as explained below: Cable
Modem, Fixed IP xDSL, PPPoE xDSL, PPTP xDSL, L2TP xDSL and Telstra
BigPond. Cable Modem and PPPoE xDSL are the most common, but if you’re not
sure which type of service you have, simply contact your Internet service provider
(ISP) to find out. You won’t be able to connect to the Internet if you choose the
wrong type during the router setup. NOTE: DSL Internet Service Providers
normally operate using the PPPoE protocol; thus, PPPoE xDSL should be the
broadband type. However, in recent years more DSL ISPs provide customers with
DSL modems that handle the PPPoE portion of Internet access automatically. In
such cases, you need to select Cable Modem as your broadband type even if you
have a DSL service.
2.3.1 Setup Procedure for Cable Modem (Dynamic IP)
Host Name — Input the host name of your computer. This is optional, and is only
required if your service provider asks you to do so.
On all screens, click “Apply” (if such button appears at the bottom) to submit any
option or configuration changes. Click “Back” to return to the previous screen.
Click “Cancel” to undo any changes you’ve made on that screen. Click “Next” or
“OK” to proceed to the next screen.