INTELLINET NETWORK 515566 Net Toner and Probe Kit - Manual (Page 9)

9
toward you.
2. Grasp the tip and gently turn it counterclockwise until it separates
from the probe body.
3. Replace the old tip with a compatible new tip (included) and reverse
Steps 1 and 2. NOTE: Do not overtighten the tip.
Replacing the Battery
Net Toner – When battery power runs low, the LOW BATT LED on the
Net Toner will light.
Net Probe — When the battery needs to be replaced, the LED indicators
will dim and the speaker sound will weaken or fail.
NOTE: When a low battery is indicated on either unit, change the battery
immediately, as continuing to test with a low battery may produce
inaccurate results. Both units require one standard alkaline 9 V battery.
Slide back the battery cover to replace new battery.
9