Guv-2000, Important safety instructions – GeneralAire GUV2000 User Manual
Page 3

G
ENERAL
A
IRE
GUV-2000
Multivoltage Phototcatalytic
Air Purifier
Installation & Maintenance
Instructions
UNPACKING THE UNIT
Each GeneralAire GUV2000 A ir Purifier unit i s shipped with t he
germicidal lamps placed in tubes with protective packaging. Carefully
remove each lamp from the tube taking care to not touch the glass
portion of the lamp with bare hands. Oils from the hands can cause
“hot spots” which reduce lamp life. Handle by the porcelain caps or
use a soft cloth. If you accidentally touch a lamp, wipe it off using a
soft cloth dampened with rubbing alcohol. The lamp is fragile and
proper care must be taken when removing from packaging.
Be sure all parts are included in the following list:
• GeneralAire GUV2000 Air Purifier
• Two 16” Germicidal Lamps (packed in tube)
• Four Sheet Metal Screws and two keps nuts
• Titanium Photocatalytic Reflector
• Installation & maintenance instructions
When installing and using this electrical equipment, basic safety precautions
should always be followed including the following:
1. READ AND FOLLOW ALL INSTRUCTIONS.
2. SAVE THESE INSTRUCTIONS.
3.
Always be sure the unit is unplugged during installation or service procedures.
4.
The ultraviolet light produced by the UV lamps is harmful to your eyes.
Do not look directly at the lamps. Should it become necessary to view the
lamps, use UV-protected safety goggles.
IMPORTANT SAFETY INSTRUCTIONS