Biamp MS-1 User Manual
Page 6
6
MS-1 REAR PANEL
AC Power Entrance (IEC)
The IEC power entrance provides for connection of the appropriate power cord (included with unit). An internal universal switching power
supply accepts 100~240VAC @ 50/60Hz, with a maximum power consumption of 350 watts.
CAUTION: Do not remove or defeat the ground prong on the power cord, as this will constitute a shock hazard. Equipment should be connected
to a mains socket outlet with a protective earthing connection. This plug is the main disconnecting device and should remain readily operable.
There are no user interchangeable parts. Please contact Biamp Technical Support or your local distributor for all service requirements.
USB Ports
These ports are inactive at this time.
RS-232 Port
This port is used to support console access to the MS-1. Settings for connection are as follows: Baud rate 57600, Data bits 8, Parity None,
Stop bits 1, and Flow Control Hardware.