Fill-Rite BD4200D Series Biodiesel Fuel Transfer Pump - Manual (Page 4)

1200H0652 REV. 0
Tel 260 747-7524 Fax 260 747-3159
Fort Wayne, Indiana USA 46809
8825 Aviation Drive
www.tuthill.com
4
Tuthill Transfer Systems (“Manufacturer”) warrants to each consumer
buyer of its Fill-Rite products (the “Buyer”), from the date of invoice or
sales receipt, that goods of its manufacture (“Goods”) will be free from
defects of material and workmanship. Duration of this warranty is as
follows:
• Heavy Duty Products - Two years
• Standard Duty Products – One year
• Economy Duty Products – One year
• Cabinet pumps, Parts, and Accessories - One year
Manufacturer’s sole obligation under the foregoing warranties will
be limited to either, at Manufacturers’ option, replacing or repairing
defective Goods (subject to limitations hereinafter provided) or
refunding the purchase price for such Goods theretofore paid by
the Buyer, and Buyer’s exclusive remedy for breach of any such
warranties will be enforcement of such obligations of Manufacturer.
If Manufacturer so requests the return of the Goods, the Goods will
be redelivered to Manufacturer in accordance with Manufacturer’s
instructions F.O.B. Factory. The remedies contained herein shall
constitute the sole recourse of the Buyer against Manufacturer for
breach of warranty. IN NO EVENT SHALL MANUFACTURER’S
LIABILITY ON ANY CLAIM FOR DAMAGES ARISING OUT OF THE
MANUFACTURE, SALE, DELIVERY, OR USE OF THE GOODS EXCEED
THE PURCHASE PRICE OF THE GOODS. The foregoing warranties
will not extend to Goods subjected to misuse, neglect, accident or
improper installation or maintenance, or which have been altered or
repaired by anyone other than Manufacturer or its authorized
representative. THE FOREGOING WARRANTIES ARE EXCLUSIVE
AND IN LIEU OF ALL OTHER WARRANTIES OF MERCHANTABILITY,
FITNESS FOR PURPOSE OF ANY OTHER TYPE, WHETHER EXPRESS
OR IMPLIED. No person may vary the foregoing warranties and
remedies except in writing signed by a duly authorized officer of
Manufacturer. Warranties or remedies that differ from the foregoing
shall not otherwise be binding on Manufacturer. The Buyer’s
acceptance of delivery of the Goods constitutes acceptance of the
foregoing warranties and remedies, and all conditions and limitations
thereof.
PRODUCT WARRANTY
BD1210C BD4210D
Warranty Two Years Two Years
Motor HP 1/4 HP 1/4 HP
Motor Volt 12V DC 12V DC
Amp 25 30
Rainproof yes yes
Flow with manual nozzle
57 LPM
15 GPM
76 LPM
20 GPM
Hose with static wire 3/4" x 12' 1" x 12'
Dimensions 12" wide 13" wide
9" high 12" high
9" deep 9" deep
Duty cycle 30 min. 30 min.
Max.Operating Temp 150°F 150°F
Min.Operating Temp 40°F* 40°F*
Minimum suction lift Bio Diesel B21-
B100
6' 6'
Maximum outlet pressure 12 psi 14 psi
Minimum dry vacuum 5" mercury 5" mercury
Outlet 3/4" F NPT 1" F NPT
Threaded tank adapter 2" M NPT 2" M NPT
Inlet suction port 1" F NPT 1" F NPT
Thermal overload protection yes yes
Integral inlet screen yes yes
Motor UL and cUL listed yes yes
Ball Bearing construction yes yes
Security Padlocking Padlocking
Fluid Compatibility
Biodiesel
B21-B100
Biodiesel
B21-B100
* Bio Diesel B100 gel temperature is 38ºF. (Bio Diesel that conforms to
ASTM D6751 Standard