Actiontec V1000H User Manual - Manual (Page 42)

39
Chapter 5 Advanced Setup
Services Blocking
Services blocking is used to prevent a device on the Modem Router’s network from
accessing particular services available on the Internet, such as receiving email or
downloading files from FTP sites. To set up services blocking on a networked device:
Click 1. Services Blocking from the menu on the left side of any Advanced
Setup screen. The Services Blocking screen appears.
Select the device on which you wish to block services from the Select Device 2.
drop-down list, or enter the device’s IP address in the Enter IP Address
text box.
Select a service, or multiple services, to block by clicking in the appropriate 3.
check box below Select service to block.
Click 4. Apply to save your changes.
Repeat steps 1-4 to block services on another device on the network. 5.
The devices that are blocked from accessing services are listed at the bottom of
the screen.