Lexibook RCD150FE User Manual

Page 28

ENGLISH

POWER SOURCES (CONTINUED)

AC OPERATION

To operate the unit using AC power, connect the small end of the AC power

cord to the AC power jack on the rear of the unit and insert the plug into an

AC outlet having 230V AC, 50Hz only. The batteries are automatically

disconnected when the AC adapter is used.

CAUTION:

• When not using AC power, disconnect the AC power cord from the wall outlet

and from the unit by pulling the plug (not the cord).

• Do not touch the AC power cord with wet hands.

• Fully insert the plug without exposing any part of the blade.

• The socket-outlet shall be installed near the equipment and shall be easily

accessible.