Power sources, Headphones jack – Lexibook RCD100DC User Manual

Page 9

BATTERY PRECAUTIONS

Follow these precautions when using batteries in this device:

1. Use only the size and type of batteries speciﬁed.

2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment.

Reversed batteries may cause damage to the device.

3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and Carbon-zinc) or old batter-

ies with fresh ones.

4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from

possible battery leakage.

5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery

manufacturer’s directions.)

HEADPHONES JACK

For private listening, connect 3.5mm (32 ohm) stereo headphones (not included) to this

jack. The speakers are automatically disconnected when the headphone plug is inserted in

the jack.

This unit is designed to operate on AC household current or DC (batteries).

BATTERY INSTALLATION

To use this unit with battery power, remove

the battery door on the bottom of the unit by

pressing in on the battery door tabs and

lifting the battery door off. Insert six (6) ‘C’

size batteries following the diagram in the

compartment.

NOTE: The DC power cord must be discon-

nected from the DC power jack on the bot-

tom of the unit in order for the unit to oper-

ate on battery power.

POWER SOURCES