I-View SDCI-220 Indoor Speed dome - Manual (Page 9)

9
For Example:
Speed Dome Address=1
ON
1 2 3 4 5 6 7 8 9 10
Speed Dome Address=2
ON
1 2 3 4 5 6 7 8 9 10
Speed Dome Address=3
ON
1 2 3 4 5 6 7 8 9 10
Speed Dome Address=4
ON
1 2 3 4 5 6 7 8 9 10
Speed Dome Address=18
ON
1 2 3 4 5 6 7 8 9 10
Speed Dome Address=1023
ON
1 2 3 4 5 6 7 8 9 10
Notes:
1. Addresses of the dome cameras are denoted by binary code system. ON
means “1” while OFF means “0”.
2. Above coded addresses are only from no.1 to no.20. The codes of
addresses from no.21 to no.1023 can be deduced by analogue.
3. The range of addresses of the spherical cameras is from 1 to 1023.
Settings of communication protocol of the dome camera (DIP1-DIP4
of SW2) and its default baud rate (DIP5-DIP6 of SW2). In case the
default baud rate of the dome camera is not in accordance with that of
the controller, please reset it as per the Table 3 (
● means the protocol
has been done).