Avision AM7100NF Quick Guide - Manual

Note: To learn the details on how to install and operate the machine, please refer to the manual in the supplied CD.
Package Contents:
y AM7100NF Main unit
y Power Cable/USB Cable/Quick Guide
y CD-ROM/Registration Card
AM7100NF Installation Guide
Connecting Your Power Cable
1. Connect one end of the power cable
to the power jack of the machine.
2. Connect the other end to an
appropriate power outlet.
Unlocking Your Machine
1. Open the document cover.
2. Locate the lock switch at the left side.
Important: If you need to transport the
product, lock the product first to protect the
scan unit.
Unpacking the Machine
Remove the plastic bag and tapes on
the machine.
Connecting Your Telephone Cord
1. Connect one end of the telephone cord
into the “LINE” port of the machine.
2. Connect the other end of the telephone
cord into an active telephone wall jack.
Removing the Tapes on the
Toner Cartridge
Caution: To prevent the toner from
damage, do not expose the toner cartridge
to light for more than a few minutes.
1. Open the toner cartridge door by
pressing the button indicated.
2. Pull out the toner cartridge as shown.
3. Remove the tapes as shown.
4. Insert the cartridge to the machine and
close the toner cartridge door.
Loading Paper
1.
Fan your paper first.
2. Pull out the Main Input Tray.
3. Press the paper guide release lever
and slide the paper guide to your
desired paper size.
www.avision.com
4. Move the paper-size dial to your
desired paper size and orientation.
Important: Whenever you wish to
change your paper size and
orientation, you need to make the
same change in the paper-size dial to
ensure proper copy result.
5. Load the paper into the input tray
and insert the input tray to the
machine.