Anest Iwata AZPVA - Manual

SPARE PARTS LIST
Air Nipple G1/4” BSP M
IMPORTANT
This spray gun should be operated only by an adequately trained operator, for safe use and maintenance of the
equipment. Any misuse or handling other than those indicated in this Instruction Manual is not covered by guar-
antee. AIR GUNSA disclaims all responsibility for any accident or damage caused by failure to observe the oper-
ational and safety procedures as from this manual. In the interest of user friendliness, this manual contains infor-
mation in a brief and concise form.
For any additional information you may require regarding. spray guns operations, or if any missing parts or any
damage during transportation is found, please contact your nearest ANEST IWATA Company (see last cover
page).
AZ PVA
SPRAY GUN FOR BODY COATINGS
Before use, adjustment or maintenance, it is important to read this instruc-
tion manual very carefully. This manual must be stored in a safe place for
any future reference that may be necessary.
GB
MAIN SPECIFICATIONS
E UROPEAN
S ALES
B RANCHES :
Max. Working Pressure: 6 bar (8,58 PSI) Noise Level (LAeqT) 87.3 dB (A)
Temperature range: 5~40C°
Instruction Manual
ANEST IWATA Europe S.r.l.
Corso Vigevano 46, 10155 Torino - Italy
Tel. 011-24 80 868 (4 linee ric. aut.)
Fax 011-85 19 44 ANEST IWATA France S.A.
38074 Saint Quentin Fallavier
Cedex Centre Evolic B.P. 7405
Tél. 04 74 94 59 69
Fax 04 74 94 34 39 ANEST IWATA (U.K.) LTD
Unit 2, Cedar Trade Park,
Ferndown Industrial Estate,
Wimborne, Dorset - BH21 7SB U.K.
Tel. 01202 - 895999 Fax: 01202 -895666
AIR GUNSA S.r.l.
46, Corso Vigevano -10155 Torino - Italy
Tel. +39 011-24 80 868
Fax +39 011-85 19 44
www.anest-iwataeu.com
e-mail: [email protected]
Quality Air Spray Guns Since 1944
www.anest-iwataeu.com/airgunsa
Manufactured by : AIR GUNSA S.r.l. -Via degliArceri,1 20010 Cardano al Campo (VA) Italy
MA0009EREV
.0
Model Type of feed Air Comsumption Weight
l/min gr
AZ PVA SUCTION 343 840
1
2
3
4
C
5
C
10
B
9
C
6-1
6-2
6
7
C
C
10-2
10-1
10-3
8
6-3
DESCRIPTION REF .PART
TRIGGER STUD 7
TRIGGER 8
PLUG 9
SEAT CUP 10
LID SET 10-1
SUCTION TUBE 10-2
ALUMINIUM CONTAINER 10-3
PACKING SET C
MILLED NUT B
DESCRIPTION REF .PART
AIR CAP SET 1
JAM NUT 2
CAP 3
FLUID NOZZLE 4
GUN BODY 5
SEAT VALVE 6
VALVE 6-1
AIR VALVE SEAT SET 6-2
AIR VALVE 6-3