Infinity Drain RTD 15 Series Submittal Sheet - Manual

RTD 15 Series
RTD 15│Tile Drain Series
- Cast Brass Frame and Body– overall dimension 4¾″
- Tile Pan Diameter 3¾″ inside dimension x ⅜″ inside depth
- 3/4” depth inside frame for material
- ¼″ drainage gap
- Indoor or outdoor use
- Commercial grade large drain body (Cast Iron, PVC or ABS)
with 4” throat
- Available with a 2” or 3” outlet
- Uses Hot Mop, Lead Pan, PVC Vinyl Liner, Rubber Liner (Chloraloy™)
Copper Pan or Fiberglass waterproofing
- Grate can be removed completely for cleaning
- Requires traditional 4-way floor pitch
- Flow rate 9 GPM with 2” outlet
- Flow rate 21 GPM with 3’ outlet
Complete Kits:
RTD 15-2I PS Clamp Down Drain Cast Iron
RTD 15-3I PS Clamp Down Drain Cast Iron
RTD 15-2A PS Clamp Down Drain ABS
RTD 15-3A PS Clamp Down Drain ABS
RTD 15-2P PS Clamp Down Drain PVC
RTD 15-3P PS Clamp Down Drain PVC
Components:
R 15A 5” Round Tile Drain Strainer Only
CDI 42 Clamp Down Drain Cast Iron
CDI 43 Clamp Down Drain Cast Iron
CDA 42 Clamp Down Drain ABS
CDA 43 Clamp Down Drain ABS
CDP 42 Clamp Down Drain PVC
CDP 43 Clamp Down Drain PVC
Optional Components:
UCP 4 Universal 4” Clamping Plate
Dimension are subject to Manufacturers tolerance and change without notice. We can assume no responsibility for use of superseded or void data.
Infinity Drain
18 Secatoag Avenue
Port Washington, NY 11050
Phone: 516.767.6786
Fax: 516.740.3066
www.InfinityDrain.com
REV. 08.01.2013
Note: Installer must verify all rough-in
dimensions prior to installation and consult
local and national codes. Conformity and
compliance to local and national codes
are the responsibility of the installer.
Page 1 of 2
Finishes:
_____
Polished Stainless
Installation (TD) Center Drain