Infinity Drain TD 15-2 Series Submittal Sheet - Manual

TD 15 Series
TD 15│Tile Drain Series
- 12 gauge 316 Stainless Steel Frame and Body
- ¾” depth inside frame for material
- ¼” drainage gap
- Indoor or outdoor use
- Commercial grade large drain body (Cast Iron, PVC or ABS) with 4” throat
- Grate can be removed completely for cleaning
- Requires traditional 4-way floor pitch
- Flow rate 9 GPM with 2” outlet
- Flow rate 21 GPM with 3” outlet
Complete Kits:
TD 15-2I SS Clamp Down Drain Cast Iron
TD 15-3I PS Clamp Down Drain Cast Iron
TD 15-2A SS Clamp Down Drain ABS
TD 15-3A PS Clamp Down Drain ABS
TD 15-2P SS Clamp Down Drain PVC
TD 15-3P PS Clamp Down Drain PVC
Components:
T 15 A 5” x 5” Tile Drain Strainer
CDI 42 Clamp Down Drain Cast Iron
CDI 43 Clamp Down Drain Cast Iron
CDA 42 Clamp Down Drain ABS
CDA 43 Clamp Down Drain ABS
CDP 42 Clamp Down Drain PVC
CDP 43 Clamp Down Drain PVC
TKEY
Lift Out Key
Optional Components:
UCP 4 Universal 4” Clamping Plate
Dimension are subject to Manufacturers tolerance and change without notice. We can assume no responsibility for use of superseded or void data.
Infinity Drain
18 Secatoag Avenue
Port Washington, NY 11050
Phone: 516.767.6786
Fax: 516.740.3066
www.InfinityDrain.com
REV. 08.01.2013
Note: Installer must verify all rough-in
dimensions prior to installation and consult
local and national codes. Conformity and
compliance to local and national codes
are the responsibility of the installer.
Page 1 of 2
Finishes:
_____
Satin Stainless
_____
Polished Stainless
Installation (TD) Center Drain