Imetec SENSUIJ CM3-200 - Manual (Page 49)

44
AUTOMATIC SHUTDOWN
The massager pillow turns itself off automatically after 15 minutes. This function does not replace the normal
turning off of the product, which must be off when not in use.
MAINTENANCE AND STORAGE
Always disconnect the appliance from the mains supply before cleaning or maintenance and when the
appliance is not in use.
The massager can be cleaned with a soft slightly damp cloth. It is also possible to use a light detergent.
Keep the massager out of children’s reach in a cool dry place. Keep it in the original packaging. Avoid contact
with pointed or sharp objects which can damage the appliance.
PROBLEMS AND SOLUTIONS
These appliances are built with the highest standards. No parts can be repaired by the user. If the appliance
does not work, follow the solutions.
Problem Possible cause Solution
The appliance makes noise
during use. This is evitable, but the
appliance is not faulty. It does not affect the duration of the
appliance.
Noise during the massage grows.
Has it been used for too
long without interruption? Turn the appliance off and have it rest
for over an hour.
Irregular right or left movements
of massager pillow mechanism.
It is structural. It is not an alteration.
It does not move or else it stops
during the massage.
The timer stopped the
appliance.
Press the start button again.
Is the plug still in the
socket?
Insert the plug in the socket.
Is the switch on? Turn the appliance on.
Has the appliance turned
off for excessive weight?
Remove the weight and wait a few
minutes. The appliance will turn back
on.
If other situations not included above should occur, pull out the plug, wait a few minutes, put the plug back in
and turn the appliance back on.
Should the appliance keep on having problems, contact the authorised assistance centre.
EN