Imetec ECO HB - Manual (Page 12)

GB
DESCRIPTION OF APPLIANCE AND ACCESSORIES [Fig. A]
On/off switch button:
1. ECO position
2. Turbo position
3. Motor unit
4. Blender shaft
5. Blade guard
6. Blades
7. Container
8. Power supply cable
FUNCTIONING
The on/off switch button operates at the speeds indicated below:
SYMBOL ON THE PRODUCT FUNCTION
ECO
Low speed, to limit energy consumption during
operation.
TURBO
High speed, to speed up processing.
ATTENTION!
All parts that come in contact with food when using the machine should
be carefully cleaned before use.
Do not rotate the hand blender’s shaft (4), as this would permanently
damage the machine [Fig. B].
HOW TO CLEAN THE SHAFT OF THE HAND BLENDER
ATTENTION!
Use caution when handling the blades (6) to prevent accidental cuts.
Never place the motor unit (3) appliance in water.
• Fill the container (7) with lukewarm water and detergent.
• Insert the hand blender’s shaft (4) in the container (7), until the blade guard (5) is fully
submerged in the mix.
• Insert the electric plug (8) in the socket.
• Press the on/off switch button in the
ECO
position and activate the appliance for 30
seconds.
• Rinse and repeat the previous stages using clean water and no detergent.
• Remove the electric plug (8) from the socket.
• Dry with a dry cloth.
• Clean the motor unit (3) and the power supply cable (8) with a damp and well squeezed
sponge.
CLEANING THE CONTAINER (7)
• The container (7) may be cleaned as follows:
- by hand, with water and a detergent.
- in the dishwasher, making sure the water’s maximum temperature does not exceed
60°C.
USE
ATTENTION!
• Do not use the appliance with solid ingredients only.
7