Imetec HI MAN EXPERT HC7 200 - Manual (Page 31)

24
EN
Contact the authorized retailer or local authorities for
information on disposal.
Unplug the device and let it run until the batteries are dead.
How to dismantle [Fig. E]:
1. Press the middle part of the blade locking device (5)
upwards with your thumb until it opens and then remove it
from the appliance.
2. Remove the back cover with a screwdriver.
3. Remove the batteries with a pair of scissors.
ATTENTION!
Do not plug the device back into the mains
after removing the batteries.
SERVICE AND WARRANTY
To request repairs or purchase spare parts, please contact
IMETEC’s customer assistance service by calling the free-
phone number below (only in Italy) or consulting the website.
A manufacturer warranty is provided for the appliance. Details
can be found on the enclosed warranty sheet.
Failure to comply with the use and maintenance instructions
provided in this user manual will invalidate all and any rights to
the manufacturer’s warranty.
MI000366
0710 (MMYY)
www. imetec.com
Tenacta Group S.p.A. Via Piemonte 5/11 24052 Azzano S. Paolo (BG) ITALY
Tel. +39.035.688.111 Fax +39.035.320.149