Allied Solutions Track Guard - Manual (Page 2)

The top of the unit is tapered as a safety precaution. The
taper helps drive the hand out of the way while the door is
closing helping to prevent hand and finger accidents. The
unit comes pre-drilled for easy install.
Designed, Engineered and Manufactured in the U.S.A. © 2008 Systems, Inc. Protecto Track 12/08
W194 N11481 McCormick Drive • Germantown, WI 53022
Phone: 262.255.1510 • Fax: 262.255.4199
Toll-Free: 800.643.5424
or visit us on the web at…www.alliedproductsolutions.com
Distributed By:
Track Guard was designed with the protection
of the door track in mind. The heavy gauge steel
construction wraps around the bottom of the door
track protecting it from the bumps and bangs
which occur while loading or unloading a truck.
The Track Guard acts as a barrier from impacts
by using both the wall and the floor for support.
The Protecto Track deflects impacts away from
the door track protecting it from expensive dam-
ages and costly repair time.
The Track Guard is powder coated safety yel-
low making it easier for the fork truck operator to
see. Whether you use pallet jacks or fork trucks,
the Track Guard keeps you protected. The unit
is available in three heights depending on your
needs; 24”,36”, or 48”. Each Track Guard comes
with a one year warranty on construction.
Kit Includes:
• Two yellow powder-coated track guards
• Sizes from 24” 36” or 48”
• Easy installation instructions
• One year warranty on construction and
workmanship
Overhead Door Track
Protection