AVSL 952.980 AD-200 - Manual (Page 5)

General Functions and Controls
1. POWER SWITCH - This switch is used to control the unit's main power.
2.
POWER CONNECTOR - This is the main power connection. Only use the supplied power
cord. Use of any other power connections may result in severe damages to the unit.
3.
DIRECT TRACK ACCESS – If you know the number of your track and want to switch to
it quickly simply type in the number. (Minimum three numbers EG: 003 or 103).
4. PITCH DECREASE BUTTON – The speed slows when the “-“ button is pressed.
5. PITCH INCREASE BUTTON – The speed rises when the “+” button is pressed.
6. CD TRAY – Load your CD on the tray here.
7. FOLDER SKIP BUTTON – Press the left button to select the folder down and the right
button for folder up select.
8. TRACK SKIP BUTTONS – “|<<” to either start the current track again or select the
previous track. “>>|” to select the next track.
9. STOP BUTTON – Stops the current track and returns it to the beginning
10. PLAY/PAUSE BUTTON – Press to start the selected track. If you press while the track
is playing it will pause the current song until you press play again.
11. EJECT BUTTON – Ejects your CD. This will only happen when the CD is in stop or pause
mode.
12. USB PORT – Insert a USB mass storage device for playing digital music files.
13.
SD/CARD SLOT - Insert an SD card in to the slot for playing digital music files.
14. LCD DISPLAY – Alphanumeric display
15. MUTE BUTTON – Turns the sound on or off.
16. SOURCE BUTTON – Used to select the sound source; CD, SD or USB.