ADATA DashDrive Air AE800 - Manual

Wireless signal
Reset button hole
Power bank slot
micro USB port
Power switch
Bridge mode indicator
External HDD indicator
Power/Charger indicator
Power level 50~100% - Green
Power level 25~ 49% - Yellow
Power level00~ 24% - Red
Unit charging – Flashing light
Long press 15 seconds –
Restore original factory settings
Long press more than 2 seconds –
Power On / Off
Short press less than 2 seconds –
Display the battery capacity for 5 seconds
AE800 Introduction
DashDrive Air AE800 Quick Start Guide
EN
Charging the AE800
Use the micro USB cable to connect a charger to the AE800 micro USB port in order to
charge. A full charge takes about 5.5 hours to complete.
Settings page
Enter your user name and password (default values are “admin”). Click the "Internet
Access” option, and select the desired network hotspot. This will share the internet access
with multiple users.
Using the AE800 as Power Bank
With the power on/off, use a USB cable to connect the mobile device to be charged to the
AE800 power bank slot.
Go to the Apple App Store/Google Play Site, then download and install the free application
DashDrive Air Elite
Setting
Using as an external HDD
Turn off the power, and connect the AE800 to a computer using the micro USB cable to
transfer data.
Phone or Tablet use
Open the network settings page of the handheld device and find the wireless
network named ADATA_AE800_XXX. Click to join this network, and then enter
the network security key: 12345678 (default password) to connect. Then
execute application DashDrive Air Elite to transfer data
PC or Laptop use
Open the network settings page of the computer and find the wireless network named
ADATA_AE800_XXX. Click to join this network, and then enter the network security key:
12345678 (default password) to connect. Then enter ADATA_AE800_XXX network disk to
transfer data
Phone or Tablet wireless hotspot use
With the mobile device connected to the AE800, use the DashDrive Air Elite application
and enter the following settings page:
*Do not use the wireless transfer function and the power bank function simultaneously.
PC or Laptop wireless hotspot use
Connect to the AE800 with your computer. Open a web browser and enter the URL:
192.168.99.1 and enter the following settings page:
For Technical Support Questions
Please visit www.adata-group.com