Approved Optics Approved 3COM 3CGBIC91 - Manual

Approved Optics www.ApprovedOptics.com Page 1 of 5
3CGBIC91-A
1000BASE-SX GBIC MMF
850NM 550M REACH SC
Applications
3CGBIC91-A
1.25Gbps GBIC Transceiver
Features
• Operating data rate up to 1.25Gbps
• 850nm LD Transmitter
• Distance Up to 550m
• 3.3V/5V Power supply and TTL Logic Interface
• Compliant with GBIC Specification Rev5.5
• Duplex SC Connector Interface
• Hot Pluggable
• Operating Case Temperature
• WDM GBE Links
Standard: 0℃~+70℃
• Fiber Channel Links
• SONET/SDH Equipment Interconnect
Product Description
The 3CGBIC91-A series optical transceivers meet the Gigabit Interface Converter
(GBIC) specification Rev. 5.5. It satisfies the optical interface specifications defined in
IEEE 802.3z Drift 5.0 for Gigabit Ethernet. This module is designed for Single-mode fiber
and operates at a nominal wavelength of 850 nm.
The transmitter section uses a multiple quantum well laser and is a class 1 laser compliant
according to International Safety Standard IEC-60825. The receiver section uses an
integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting
post-amplifier IC. A PECL input /output logic interface is used. TTL RX-LOS output
simplifies interface to external circuitry. A 20-pin SCA-2 host connector is used to connect
the converter to the host system.