Knape&Vogt BYP-60A Series - Manual (Page 2)

Hmax = Door Height + 2-1/16"
Hmin = Door Height + 1-1/2"
SLIDING DOOR HARDWARE - BY PASS
Assembly
Instructions
#310301_B (1112)
1
PREPARE OPENING
2-Door Width = 2 x Door Width - 1"
3-Door Width = 3 x Door Width - 2"
Note: For 3/4" doors, use Carrier
A on rear door. For 1-3/8" door,
use Carrier A on front door.
3/4" Door
1,9 cm Porte
1,9 cm Puerta
Opening Height
Hauteur Ouverture
Altura Abertura
Opening Height
Hauteur Ouverture
Altura Abertura
1-3/8" Door
3,5 cm Porte
3,5 cm Puerta
B A B A
5/8"
(1,6 cm)
5/8"
(1,6 cm)
3/8" - 1/2"
(1 cm - 1,3 cm)
3/8" - 1/2"
(1 cm - 1,3 cm)
Front
Avant
Delantera Front
Avant
Delantera
Door Height
Hauteur Porte
Altura Puerta Door Height
Hauteur Porte
Altura Puerta
1-1/4" - 1-9/16"
(3,2 cm - 4 cm)
1-1/4" - 1-9/16"
(3,2 cm - 4 cm)
1"
(2,5 cm)
1"
(2,5 cm)
2-1/2"
(6,4 cm)
2-1/2"
(6,4 cm)
2
MOUNT FRAME HARDWARE
• Center track in opening.
• Using track as template, mark screw locations.
• Drill 3/32" pilot holes and secure with (#8 x 1-1/4") s crews.
Note: If necessary, track
may be cut with a fine
tooth saw.