Ingalls 35270 User Manual
Ingalls For the car
Installation Instructions
1.
Take alignment readings and determine change to be made.
2.
Remove the upper nut and cam bolt from strut. Loosen lower
bolt.
3.
Install new camber adjuster bolt so that cam fits between strut
bosses.
4.
Install loose cam, lock washer, and nut. Tighten slightly.
5.
Turn cam bolt to make desired change.
6.
Tighten nut on camber adjuster while holding bolt head
steady.
7.
Tighten lower nut on strut bolt to manufacturer's specifica-
tions.
8.
After adjusting camber, adjust toe and road test vehicle.
ING3527-72897
Copyright © 1997-04 Ingalls Engineering Co., Inc
See also other documents in the category Ingalls For the car:
- 40000 Series (1 page)
- 93037 (3 pages)
- 93300 (2 pages)
- 93043 (3 pages)
- 39209 (2 pages)
- 35220 (1 page)
- 38930 (1 page)
- 93180-93181 (3 pages)
- 26128 (1 page)
- 93184 (2 pages)
- IK500033RDX (1 page)
- 35590-35622 (1 page)
- 35150 (1 page)
- 54300 (1 page)
- 38500 (1 page)
- 38420 (1 page)
- 23220 Series (1 page)
- 35623 (1 page)
- 38300-38320 (1 page)
- 35200 (1 page)
- 38600-38620 (1 page)
- 93029 (3 pages)
- 35180 (1 page)
- 38950-38970 (2 pages)
- 35750-35780 (1 page)
- 93038 (2 pages)
- 38525 (3 pages)
- 29600 (1 page)
- 43500 Series (1 page)
- 38200-38220 (1 page)
- 38250-38270 (1 page)
- 93040 (3 pages)
- 38940 (1 page)
- 53200 (1 page)
- 93055 (2 pages)
- 93045 (3 pages)
- 81250-81290 (1 page)
- 26126 (1 page)
- 38955-38975 (2 pages)
- 26125 (1 page)
- 29700 (1 page)
- 93046 (2 pages)
- 38980 (2 pages)
- 35640-35650 (1 page)
- 35850-35860 (1 page)