Yamaha CLP-970A - Manual (Page 87)

CLP-970A
87
Message List
Message Meaning
The normal (factory default) settings (including the memory song setting)
(“FactorySet” on page 85) have been restored. This message also appears if
you press and hold down the C7 and B 6 keys and turn on the power to the
Clavinova (page 85).
The Clavinova’s flash memory (storage memory) has expired. Consult your
Yamaha dealer. If this message appears, the Clavinova will not back up the
songs and settings in memory. Press the [EXIT] button to return to the pre-
vious screen.
You turned off the power to the Clavinova while it was writing a song to
storage memory. This message appears next time you turn on the power.
The Clavinova checks if the contents of storage memory can be recovered.
This message appears following the message “LastPowerOffIllegalMemo-
rySongChecking,” indicating that the Clavinova recovered data in the stor-
age memory as much as possible.
This message appears following the message “LastPowerOffIllegalMemo-
rySongChecking,” indicating that the Clavinova could not recover data in
the storage memory and that all memory songs were deleted.
There is not enough memory space left and you cannot save any more songs.
Delete some songs in the storage memory (page 51), then save new data to
memory.
You tried to delete a song that does not exist in the storage memory. You
cannot delete the song.
This message prompts you to select whether you wish to overwrite the exist-
ing data with new data when you add recordings to a song. Press the B [+
(YES)] button to allow overwriting. Press the B [– (NO)] button to cancel.
You tried to start playing a song or perform another operation right after
you select the song. Wait until the message disappears.
This message prompts you to select whether you wish to save the edited set-
tings. Press the B [+ (YES)] button to save the settings. Press the [EXIT] but-
ton to cancel.